Saturday 4 February, 2012

Samsung Galaxy Note Gingebread Upgrade to N7000XXLA1 Android 2.3.6

Posted by pinku at 1:13 am
This N7000XXLA1 Android 2.3.6 Gingebread build for Samsung Galaxy note GT-N7000. This firmware modified or created date of January 05, 2012. This Firmware build is an update from previous release N7000XXKL8. This Firmware version for International Galaxy Note. This Firmware is  greater stability, smoother, faster and more battery life.

Firmware info: 
PDA:-------------- CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar 
PHONE: ----------MODEM_N7000XXLA1_REV_05_CL1093393.tar
CSC: --------------GT-N7000-MULTI-CSC-OXALA1.tar
KERNEL: --------KERNEL_N7000XXLA1_CL868264_REV02_eng_mid_noship.tar
UMS: --------------UMS_N7000XXLA1_CL868264_REV02_user_low_ship_16GB.tar
EFS: ---------------EFS_N7000XXLA1_CL868264_REV02_user_low_ship.tar


Download some files:
1. Odin Multi Downloader
2. Pit file
3. GT-N7000__OXA_N7000XXLA1_N7000OXALA1 ( pass - samfirmware.com ) 


info:
1. Full charge your mobile phone and computer UPS (at least above 60%-70%). 
2. Back up your all important files and app stored on your device. All files and app deleted during this upgrade.

Disclaimer: We shall not held responsible if something happens to your device by following this guide. Proceed at your own risk!

Let’s start installing N7000XXLA1 Android 2.3.6 Gingebread:~
1. Extract the downloaded files.

2. Run Odin Multi Downloader.
3. Load each specific binary files.
  • PIT:---------Q1_20110914_16GB.Pit
  • PDA:-------CODE_N7000XXLA1_CL868264_REV02_user_low_ship.tar
  • PHONE:---MODEM_N7000XXLA1_REV_05_CL1093393.tar
  • CSC:-------GT-N7000-MULTI-CSC-OXALA1.tar


 4. Put the  Samsung Galaxy  note GT-N7000  in Download Mode and connect to PC.

  • Power off your phone then Press Home + Volume Down + Power Button. When show a yellow triangle icon then connect your phone to your pc via USB.




5. Click Start Button and Let the whole process finish. When it successfully installed then the phone reboots.
6. Now, again the device on with download mode , this time flash the Kernel. Click the PDA button then load KERNEL_N7000XXLA1_CL868264_REV02_eng_mid_noship.tar

7. Next click "Start" to flash the Kernel.
8. Wait until the device reboot and then unplug the phone from PC.

0 comments:

Post a Comment

c

 

Copyright © 2011 Android World | Design by Kenga Ads-template